Upgrade brocade firmware from USB

Upgrading brocade firmware from USB is really simple. Just follow this procedure. Keep in mind that Brocade switches support firmware download from a Brocade-branded USB device. You cannot use a third-party USB device. Enabel USB usbstorage -e Upload and apply firmware firmwaredownload -U /usb/usbstorage/brocade/firmware/v7.3.0 Disable USB (You must unmount the USB device) usbStorage -d That’s…

Bonding On CentOS

Channel bonding is a computer networking arrangement in which two or more network interfaces on a host computer are combined for redundancy or increased throughput. We have different bond modes: mode=1 (active-backup) Active-backup policy: Only one slave in the bond is active. A different slave becomes active if, and only if, the active slave fails.…

VMware, RDP error after removing and adding a virtual nic on Windows 2008R2

Hi everyone, should happen that, after removing a virtual nic on a vm running windows 2008R2, and after re-adding a newone, you cannot connect using RDP protocol. The problem is related to RDP-Tcp connection. If you execute Remote Desktop Session Host Configuration unnder connection you can find the default connection named RDP-Tcp If you have a…

Check Out koodzo.com!