Brocade enabling and disabling Access Gateway mode

Brocade enabling and disabling Access Gateway mode

Reading Time: 2 minutes Use the following steps to enable and disable Access Gateway mode. After you enable AG mode, some fabric information is erased, such as the zone and security databases. Enabling AG mode is disruptive because the switch is disabled and rebooted. For more information on the ag commands used in these steps, refer to the Fabric…

Upgrade brocade firmware from USB

Upgrade brocade firmware from USB

Reading Time: < 1 minute Upgrading brocade firmware from USB is really simple. Just follow this procedure. Keep in mind that Brocade switches support firmware download from a Brocade-branded USB device. You cannot use a third-party USB device. Enabel USB usbstorage -e Upload and apply firmware firmwaredownload -U /usb/usbstorage/brocade/firmware/v7.3.0 Disable USB (You must unmount the USB device) usbStorage -d That’s…

Check Out koodzo.com!