How to gather STAG on DELL Switches

How to gather STAG on DELL Switches

Reading Time: < 1 minute Hi, all I’d like to share with you how to gather STAG on DELL switches using CLI according to switch models: F10 S Series SWITCH01#show inventory F10 N Series SWITCH02#show system id PowerConnect 54xx SWITCH03# show system   Having the STAG you can follow this link to check warrenty.  

Check FCoE Parameter On ESXi and Switch F10 S5000

Reading Time: 2 minutes Hi all, according to my last experience with FCoE, I’d like to share a step by step guide on how to check everything before configuring FCoE on ESXi and how to find if it works correctly. First of all you need to note down your FCoE adapter model and check firmware and driver version supported…

Configure VLT on Force10 S4810

Configure VLT on Force10 S4810

Reading Time: < 1 minute Configuring VLT is easy. You need just to run the following commands. Configure a Static LAG between the VLT swithes configure interface range fortyGigE 0/56 , fortyGigE 0/60 no shutdown interface port-channel 128 channel-member fortyGigE 0/56, 60 no shutdown Configure a VLT Domain on each VLT Peer On first switch configure vlt domain 1 primary-priority 10 back-up…

Compellent Best Practises with VMware vSphere 6.x

Compellent Best Practises with VMware vSphere 6.x

Reading Time: 2 minutes In this post I just want to summarize the best practises need for configuring correctly vSphere 6.x with DELL Compellent.. The original article is located here:   FC HBAs For each of these adapters, the method to set the driver queue depth and timeouts uses the following general steps: 1. Locate the appropriate driver name for…

Dell Compellent Upgrade How To

Dell Compellent Upgrade How To

Reading Time: < 1 minute Hi all, I’ll try to explain, based on my experience, which is the best way to run successfully a CML upgrade. We have different scenarios: Firmware upgrade Storage expansion Hardware upgrade Firmware Upgrade First of all you have to understand the starting point and the ending point. It is really important which firmware is currently…

Install OMSA on CentOS/RedHat

Install OMSA on CentOS/RedHat

Reading Time: < 1 minute If you need to install Open Manage Server Administrator (OMSA) on a Linux (CentOS or RedHat) system the fastest way is the following: Note 1: These instructions work for RHEL5, RHEL6, CentOS, Scientific Linux. Note 2: The version of yum distributed on CentOS 3 by default is too old (yum 2.0.8). You will need to upgrade…

Check Out koodzo.com!